The following video presents SIGMA 14-24mm F2.8 DG HSM | Art | Choices:
Sigma will provide a chargeable installation service of the Rear Filter Holder FHR-11 for the following lenses (for Canon):
- SIGMA 14-24mm F2.8 DG HSM | Art for Canon
- SIGMA 14mm F1.8 DG HSM | Art (for Canon)
Here are some details of the Installation Service:
- Only available for the Canon mount lens. There are no plans for the development in SIGMA and Nikon mounts.
- The cost, warranty and duration of the service depend on each country and territory. In Japan, the service is expected to take about 1 week. (Please confirm it when you apply for this service.)
- * The installation cost includes the cost for Rear filter holder FHR-11.
- Please contact your nearest authorized SIGMA service station at https://www.sigma-global.com/en/about/world-network/ .
- The chargeable installation service of the Rear Filter Holder FHR-11 for the SIGMA 14-24mm F2.8 DG HSM | Art for Canon starts from May, 2018.
In case it is not convenient for your environment to use the installation service and prefer to do it by your own effort, the necessary parts can be sold.
Customers who do not own the appropriate tools or who do not feel confident in attaching the filter holder themselves may take advantage of the chargeable installation service.
Please contact your nearest authorized SIGMA subsidiary / distributor for further information.
Sigma 14mm F1.8 DG HSM Art lens on a Canon EOS 5D Mark IV DSLR:
The following video presents Sigma 14mm F1.8 DG HSM Art from José Francisco Salgado on Vimeo:
“All scenes shot in Badlands National Park, South Dakota with the new Sigma 14mm F1.8 DG HSM Art lens on a Canon EOS 5D Mark IV DSLR. All images processed in Lightroom. Sequences edited in After Effects.
Sequence 1 (397 exp): 15 sec, F1.8, ISO 4000. 1 July 2017
Sequence 2 (360 exp): 13 sec, F1.8, ISO 4000. 1-2 July 2017
Sequence 3 (208 exp): 13 sec, F1.8, ISO 1000. 4-5 July 2017“
Installation service for the Rear Filter Holder FHR-11 on the SIGMA 14-24mm F2.8 DG HSM | Art for Canon
Responding to popular demand, the SIGMA Corporation is pleased to announce that another lens is compatible with the Rear Filter Holder FHR-11.
The chargeable installation service of the Rear Filter Holder FHR-11 for the SIGMA 14-24mm F2.8 DG HSM | Art for Canon starts from May, 2018.
The Rear Filter Holder FHR-11 is an accessory exclusively designed for the SIGMA 14-24mm F2.8 DG HSM | Art (for Canon) and the SIGMA 14mm F1.8 DG HSM | Art (for Canon). It enables photographers to use a sheet filter on the lens. By attaching the Rear Filter Holder FHR-11 to the rear of the lens, it allows more freedom for photographic expression.
For details of the price and the commencement date of the service, please contact your nearest authorized SIGMA subsidiary/distributor.
1. Rear Filter Holder FHR-11
2. Guide template
3. Fixing screws (3 pieces)
UPC Code: 0085126 934866
・Any damage or faults caused by attaching the filter holder on your own will not be covered by the warranty.
・This product is exclusive to the SIGMA 14-24mm F2.8 DG HSM | Art 018 for Canon and the SIGMA 14mm F1.8 DG HSM | Art 017 for Canon. Please do not attempt to attach it to any other lenses or mounts. There is a risk that it may cause damage to the lenses and cameras.
・Please be careful to avoid scratches to the lens or the electrical contacts when attaching the filter holder.
・Please ensure not to drop the small fixing screws inside the lens.
・Please ensure you remove the filter after shooting as it could scratch the rear element of the lens.
Please support this site. Buy the above Sigma Lenses, and Canon EOS 5D Mark IV Camera as well as Accessories from our Trusted Sponsor B&H Photo-Video, the Professional’s Source, satisfying millions of customers for over 35 years (prices are in USD):